Element Optics Accu-Lite 34mm Weaver / Picatinny High Rifle Scope Rings
If you need maximum clearance for a 34mm scope setup without sacrificing strength or consistency, the Element Optics Accu-Lite 34mm High Weaver / Picatinny Rings are the “fit it once and forget it” option. Machined from a single block of 7075-T6 aluminium with stainless steel hardware, they’re built to handle serious torque and recoil without shifting or losing alignment. The high profile gives you plenty of space for larger objective lenses or raised rail setups, so you’re not fighting clearance issues with barrels or accessories. Even with the extra height, they stay rigid and precise thanks to tight CNC tolerances and a solid clamping design. Once properly torqued, they’re designed to hold zero reliably, making them a strong choice for long-range rifles, precision builds, or anything running a bigger optic.
-Nathan (Technical Advisor)
Every pair of Element Accu-Lite rings begin its life as a single block of 7075-T6 Aluminium, which has a strength-to-weight ratio superior to almost any other alloy. This block is CNC machined to the tightest tolerances to ensure a smooth and precise mating surface between the riflescope body tube & base. Add to that a Stainless Steel crossbolt, base clamp & nut, and you have one of the most precisely built, reliable ring sets on the market.
A good ring set is critically important, as it is the only point of connection between your rifle and riflescope. The Accu-Lite will provide you a lifetime of reliable service, giving you peace of mind in even the harshest shooting environments.
Height = 31mm
| MODEL | 30mm L | 30mm M | 30m H | 34mm L | 34mm M | 34mm H |
| HEIGHT | 22mm
(0.87”) |
25mm
(0.98”) |
29mm
(1.14”) |
24mm
(0.94”) |
27mm
(1.06”) |
31mm
(1.22”) |
| WEIGHT (PAIR) | 113g
(4.0oz) |
123g
(4.3oz) |
137g
(4.8oz) |
117g
(4.1oz) |
127g
(4.5oz) |
141g
(5.0oz) |
| MATERIAL | 7075-T6 ALUMINUM & STAINLESS STEEL | |||||
| MOUNTS TO | PICATINNY WEAVER | |||||
| TOOLS REQUIRED | 13mm OR 1/2” SOCKET/SPANNER, T15 TORX | |||||
| MAX TORQUE (RINGS) | 25 IN-LBS (2.8NM) | |||||
| MAX TORQUE (BASE) | 68 IN-LBS (7.7NM) | |||||
-
Precision CNC Machined from aircraft-grade 7075-T6 Aluminum & Stainless Steel
-
Built to handle high torque specs without failing
-
Universal Base Nut can be used with Metric & Imperial wrenches
-
Fits both Weaver and Picatinny rails
-
Rounded finish prevents snagging on bags, vegetation & obstacles
- Element Optics Accu-Lite 34mm High Rings, Torx Screw.
1. What tube size do these rings fit?
They are designed specifically for 34mm scope tubes.
2. Will they fit both Weaver and Picatinny rails?
Yes, they are fully compatible with both Weaver and Picatinny systems.
3. What is the height of the high version?
The high 34mm rings measure approximately 31mm base-to-centre height.
4. What are they made from?
They are CNC-machined from 7075-T6 aluminium with stainless steel crossbolts, nuts, and clamps for added strength and durability.
5. Are they strong enough for heavy recoil?
Yes, they are designed to withstand high torque settings and repeated recoil without shifting or deforming.
6. Do they help maintain zero?
Yes, when installed correctly with proper torque, they are built to maintain a consistent and repeatable zero.
7. When should I choose high rings?
High rings are best for large objective lenses (typically 50–56mm), raised rails, or setups where extra clearance is needed over the barrel or accessories.
8. Are they lightweight?
Yes, despite their strength and height, they remain relatively light at about 141g per pair.
9. Are they better than budget rings?
Yes, the tighter machining, stronger materials, and improved consistency make them significantly more reliable than cheaper mounts.
10. What tools are needed for installation?
A Torx T15 driver and a torque wrench are recommended for correct installation and long-term reliability.
- Lifetime Warranty.
Element Optics 34mm Ring info sheet: HERE
