Element Optics Accu-Lite 34mm Weaver / Picatinny Low Rifle Scope Rings
If you’re running a 34mm scope and want a low-profile, rock-solid mounting solution, the Element Optics Accu-Lite 34mm Weaver / Picatinny Low Rings are about as clean and reliable as it gets. Machined from a single block of 7075-T6 aluminium with stainless steel hardware, they’re built for strength without adding unnecessary weight. The low height keeps your scope sitting close to the bore, which helps with a natural cheek weld and a more consistent shooting position. Despite the slim profile, they’re still properly rigid and designed to hold zero under recoil thanks to tight CNC tolerances and solid clamping surfaces. It’s a no-nonsense mount that just does its job properly, whether you’re running a precision rifle, a .22 trainer, or a lightweight field setup.
-Nathan (Technical Advisor)
Every pair of Element Accu-Lite rings begin its life as a single block of 7075-T6 Aluminium, which has a strength-to-weight ratio superior to almost any other alloy. This block is CNC machined to the tightest tolerances to ensure a smooth and precise mating surface between the riflescope body tube & base. Add to that a Stainless Steel crossbolt, base clamp & nut, and you have one of the most precisely built, reliable ring sets on the market.
A good ring set is critically important, as it is the only point of connection between your rifle and riflescope. The Accu-Lite will provide you a lifetime of reliable service, giving you peace of mind in even the harshest shooting environments.
Height = 23.9mm
| MODEL | 30mm L | 30mm M | 30m H | 34mm L | 34mm M | 34mm H |
| HEIGHT | 22mm
(0.87”) |
25mm
(0.98”) |
29mm
(1.14”) |
24mm
(0.94”) |
27mm
(1.06”) |
31mm
(1.22”) |
| WEIGHT (PAIR) | 113g
(4.0oz) |
123g
(4.3oz) |
137g
(4.8oz) |
117g
(4.1oz) |
127g
(4.5oz) |
141g
(5.0oz) |
| MATERIAL | 7075-T6 ALUMINUM & STAINLESS STEEL | |||||
| MOUNTS TO | PICATINNY WEAVER | |||||
| TOOLS REQUIRED | 13mm OR 1/2” SOCKET/SPANNER, T15 TORX | |||||
| MAX TORQUE (RINGS) | 25 IN-LBS (2.8NM) | |||||
| MAX TORQUE (BASE) | 68 IN-LBS (7.7NM) | |||||
-
Precision CNC Machined from aircraft-grade 7075-T6 Aluminum & Stainless Steel
-
Built to handle high torque specs without failing
-
Universal Base Nut can be used with Metric & Imperial wrenches
-
Fits both Weaver and Picatinny rails
-
Rounded finish prevents snagging on bags, vegetation & obstacles
- Element Optics Accu-Lite 34mm Low Rings, Torx Screw.
1. What size scope tube do these rings fit?
They are designed specifically for 34mm scope tubes.
2. Will they fit both Weaver and Picatinny rails?
Yes, they are fully compatible with both Weaver and Picatinny rail systems.
3. What is the height of the low version?
The low 34mm rings are approximately 24mm base-to-centre height.
4. What are they made from?
They are CNC-machined from 7075-T6 aircraft-grade aluminium with stainless steel crossbolts and hardware.
5. Are they strong enough for heavy recoil?
Yes, they are designed to handle high torque settings and repeated recoil without shifting or deforming.
6. Do they help maintain zero?
Yes, when correctly torqued, they are built to maintain a consistent and repeatable zero.
7. Why choose low rings instead of medium or high?
Low rings keep the scope closer to the barrel, improving cheek weld and alignment, as long as your objective lens clears the rifle.
8. Are they lightweight?
Yes, the pair weighs roughly 117g, making them very light for 34mm mounts.
9. Are they better than budget rings?
Yes, the tighter machining, stronger materials, and better consistency make them significantly more reliable than cheaper mounts.
10. What tools are needed for installation?
Typically a T15 Torx bit and a torque wrench are recommended for correct installation.
- Lifetime Warranty
Element Optics 34mm Ring info sheet: HERE
