Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings - High (30.5mm)
This Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings in the high 30.5mm version is built for setups where you need extra clearance for bigger scopes or awkward rail heights. It’s a solid one-piece CNC aluminium mount that locks onto Weaver or Picatinny rails and keeps your optic stable even under recoil. Simple, tough, and made for real use—it just gets your scope sitting right without any wobble or drama.
-Nathan (Technical Advisor)
CNC machined, allowing pre-programmed software and code to control the movement of the production equipment. 4 screws per ring and Weaver slot dimensions that allow them to be used on both Weaver and Picatinny rails and bases.Made from 6063-T6 aluminium alloy for use on real firearms.
This Weaver Scope Ring is designed for quick and easy mounting to 21mm Picatinny and Weaver rails and connects to the SCACD-22 Screw-in Anti Cantilever Device Mount.
Height = 30.5mm
- Ring Length: 21mm / 0.8in
- Ring Dia.: 30mm / 1.2in
- Height: 36mm / 1.4in from base to ring center
- Weight: 135g / 4.8oz
- Material: 6063-T6 aluminum alloy
- Finish: Black matte
- Easy and quick installation
- Fit on 21mm picatinny and weaver rail
- Designed for real firearms
- With connection to SCACD-22 Screw-in Anti Cantilever Device Mount
- 1 pc T10 torx wrench
- 30mm Diameter, 4 Screws per Ring, CNC Made
- High Profile 36mm 1.4in from Base to Ring Centre
- Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings - High (30.5mm)
1. What tube size does it fit?
It fits 30mm scope tubes.
2. What is the height of the high version?
The high model has a 30.5mm base-to-centre height.
3. What is it used for?
It’s used to mount rifle scopes higher above the rail, useful for larger objective lenses or better eye alignment.
4. Does it fit Picatinny rails?
Yes, it is compatible with both Weaver and Picatinny rails.
5. Is it a one-piece or two-piece mount?
It is a pair of separate rings, not a single one-piece mount, but designed to work together as a matched set.
6. What material is it made from?
6063-T6 aluminium alloy for strength and durability.
7. Is it suitable for real firearms?
Yes, it is designed for real firearm recoil use.
8. Does it hold zero well?
Yes, when properly installed and torqued, it is built to stay stable under recoil.
9. What tools are needed to install it?
Typically just a Torx/hex key (often included depending on package).
10. Why choose a high mount?
High mounts give more clearance for large objective scopes and can improve eye alignment depending on your rifle setup.
- VICOPTICS 1 Year Warranty