Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings - Medium (25.4mm)
This Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings in the Medium (25.4mm) height is a really solid all-round option if you want a stable, no-wobble scope setup on a Picatinny or Weaver rail. It’s CNC-machined from tough aluminium with a four-screw clamp system per ring, so your optic stays locked in even under recoil or rough handling. The medium height gives you a nice balance between cheek weld comfort and clearance for most 30mm scopes without feeling too high or too low.
-Nathan (Technical Advisor)
CNC Made, let pre-programmed software and code controls the movement of production equipment. 4 screws per ring, and Weaver slot dimensions that allow them to be used on both Weaver and Picatinny rails and bases. Made of 6063-T6 aluminium alloy, for use on real firearms.
These Weaver Scope Rings are designed for easy and quick installation on 21mm picatinny and weaver rail, with connection to SCACD-22 Screw-in Anti Cantilever Device Mount.
Height = 25.4mm
- Ring Length: 21mm / 0.8in
- Ring Dia.: 30mm / 1.2in
- Height: 32mm / 1.3in from base to ring center
- Weight: 121g / 4.3oz
- Material: 6063-T6 aluminum alloy
- Finish: Black matte
- Easy and quick installation
- Fit on 21mm picatinny and weaver rail
- Designed for real firearms
- With connection to SCACD-22 Screw-in Anti Cantilever Device Mount
- 1 pc T10 torx wrench
- 30mm Diameter, 4 Screws per Ring, CNC Made
- Medium Profile 32mm 1.3in from Base to Ring Centre
- Vector Victoptics ACD Screw Mount 30mm Weaver Mounting Rings - Medium (25.4mm)
1. What tube size does it fit?
It fits 30mm scope tubes.
2. What height is the medium version?
The medium version is about 25.4mm base-to-centre height.
3. Does it work with Weaver and Picatinny rails?
Yes, it’s designed to fit both Weaver and 21mm Picatinny rails.
4. Is it a one-piece mount?
No, it’s a pair of matching rings, not a single-piece cantilever mount.
5. What material is it made from?
6063-T6 aluminium alloy for strength and durability.
6. How many screws does each ring use?
Each ring uses 4 screws for a very secure hold.
7. Is it suitable for real firearms?
Yes, it’s designed for real firearm recoil, not just airsoft.
8. Does it help hold zero well?
Yes, the multi-screw clamping system is built to resist shifting under recoil when properly tightened.
9. What comes in the box?
You typically get the two rings and a T10 Torx wrench for installation.
10. Why choose medium height?
Medium is the “safe middle ground” — it clears most scopes while still keeping a comfortable shooting position and good cheek weld.
- VICOPTICS 1 Year Warranty